Reconditioned on the shelf ready to ship.
John Deere Two-Piece MFWD Axle
◉ Dana 740 with or without AutoTrac
◉ 10 Bolt Wheels (Upgrade for 8 Bolt Axles)
◉ 15.692 Ratio
◉ Small Frame Transmission Rotation
◉ 6615, 6715, 7220, 7320, 7130, 7130 Premium, 7230, 7230 Premium, 6140M
◉ Replaces: AS2045 AL151674 and DANA 740 Non-TLS Models AL173216, AL158127, AL171555, AL175358, AL162869, AL171556, AL173217, AL151677, AL174884, AL216512, AL219163, AL151676
◉ Upgrade for 8 Bolt Axles AL205814, AL219162,
◉ Can be converted to 17.50 Ratio: AL173218, AL158465, AL171561, AL174215, AL205815, AL219164, AL216513, AL219165
◉ Convert with Ring and Pinion 17.50 AL160544 (Subs to AL174538)
NOTE: List Price for New Parts plus Labor to Assemble
◉ Axle less Final Drives - $17,500
◉ Final Drives - $15,650 each
◉ Clockwise Forward Rotation
AL158127 HD Version
◉ RH Long Axle Housing 740.01.003.63
◉ LH Short Axle Housing 740.01.004.63
◉ LH Steering Knuckle 75006029639
◉ RH Steering Knuckle 75006028639
AL173216 Accepts AutoTrac with Minor Mods
AXLE less FINAL DRIVES:
◉ Heavy Duty Axle
(Marked AL158127, AL158465, AL171555, AL171561)
◉ Axle Housing AL160547
◉ Axle Housing AL160548 (Subs to AL171832)
◉ Ring and Pinion 15.692 AL160177 (Subs to AL174435)
◉ Differential AL160210
◉ Gear Set AL160133 (Subs to AL166520)
◉ Clutch Disk AL160176
Use with 750 Steering Knuckles and King Pins
◉ Standard Axle
(Marked AL173216 or AL173218)
◉ Axle Housing AL175040 (AL210008) 740.01.011.61.9, 74001011619
◉ Axle Housing AL175041 (AL210005)
◉ Ring and Pinion 15.692 AL160177 (Subs to AL174435)
◉ Differential AL161278
◉ Gear Set AL174044
◉ Clutch Disk AL160176
Use with 740 Steering Knuckles and King Pins
FINAL DRIVES:
Dana 740 Final Drive, Left Hand with 3 Planetary Gears
Imaging is the most accurate method to guarantee fitment.
◉ Planetary Carrier - L156890
◉ Planetary Gears - L166395 (subs for L156865)
◉ Ring Gear - L204842 (subs for L156871)
◉ Drive Hub - L173479 (subs for L156883)
◉ Wheel Hub - AL160577, L166396
◉ Steering Knuckle, LH - L157368 or L171448 (axle tag # required)
◉ Steering Knuckle, RH - L157366 or L171449 (axle tag # required)
◉ Driveshaft AL160131 or AL177178
◉ Inner Driveshaft AL160164 or AL160161
◉ H-Yoke L156895 or AL161324
◉ Outer Driveshaft AL160165 or L174432
◉ U-Joints AL160163 or AL160160 (Qty 2)