Scraper High Flow Hydraulic Pump

John Deere 9x20, 9x30 High Flow Hydraulic Pump Conversion

Total Hydraulic Flow Rate

• High-Flow hydraulics
• Pump output 78 gpm (295 L/min)
• Flow at single SCV 35 gpm (132 L/min)

Two hydraulic pumps with a total of 75-gpm pump output capacity are combined with four hydraulic valves that flow 43 gpm per section.
These selective control valves (SCVs) are designed for commercial applications and DO NOT include a float feature. This system is not recommended for agricultural implements with continuous flow requirements. When maximum hydraulic pump capacity is reached, multiple functions will continue to operate at the same proportional flow rate. This will prevent the rear scraper from slowing down, in relation to the front scraper, when operating the front and rear scrapers at the same time.

What's Included:

• Hydraulic Pump, 75cc, 75GPM High Flow Hydraulic System W/ 43GPM Flow
• Hydraulic Pump, 75 cm³ / 4.5 Inch³
• Scraper Tractor High Flow Hydraulic Pump 
• Hydraulic Pump, 45cc, 75 gpm High Flow Hydraulic System
• 43 gpm Flow 

30 Series Related Pump Numbers

• 45cc Pump - RE252181
• 75cc Pump - RE203958, RE229649, PG202078
• Axle Lube Pump - RE267657, RE302758, RE170807
• Priority Valve - RE573998, RE243090

20 Series Related Pump Numbers

• 45cc Pump - RE203959
• 75cc Pump - RE203958, RE229649, PG202078
• Axle Lube Pump - RE267657, RE302758, RE170807
• Priority Valve - RE201015

• Scraper SCV's - RE213946
• End Valve - RE213498
• End Valve - RE208099
• Valve Harness - RE201121
• Accumulator - RE196771
• SCV Couplers With Support - R283744, RE195592
• HCU/SCU Controller - RE203682, PG200750 (Marked RE203698)
• SCO/SCV Controller - RE203684 (Marked RE203699)
• Priority Valve Lines - RE204629, RE205020, RE235597
• Pump 75cc - RE203958, RE229649, PG202078
• Pump 45cc - RE203959
• Pump Hydraulic Lines - RE206373, RE209495, RE205813, RE209495, RE205814, RE211290, RE211289, RE255707, RE211296
• Oil Filter - RE196769
• Hydraulic Reservoir - RE268265