QuadTrac Front Idler Axle

Case IH QuadTrac Front Idler

Buying Options

• Certified Good = Axle held oil and hub end-play is in spec. (.001 - .004)

Fitment

• QuadTrac 9370, QuadTrac 9380 (requires your wheels to be machined to fit)
• (MY01 - MY01) QuadTrac STX440
• (MY01 - MY05) QuadTrac STX375, STX425, STX450, STX500
• (MY06 - MY07) QuadTrac STX380, STX430, STX480, STX530
• (MY06 - MY07) QuadTrac 385, QuadTrac 435, QuadTrac 480, QuadTrac 530
• (MY07 - MY11) QuadTrac 485, QuadTrac 535
• (MY11 - MY14) QuadTrac 450, QuadTrac 500, QuadTrac 550, QuadTrac 600
• (MY14 - MY17) QuadTrac 500, QuadTrac 540, QuadTrac 580, QuadTrac 620
• (MY17 - MY19) QuadTrac 470, QuadTrac 500, QuadTrac 540, QuadTrac 580, QuadTrac 620
• (MY19 - ) QuadTrac 470, QuadTrac 500, QuadTrac 540, QuadTrac 580, QuadTrac 620
• Case IH and New Holland Combine Track Systems
  • 7010, 7120, 7230, 7240, 8010, 8120, 8230, 8240, 9010, 9120, 9230, 9240
  • CR6090, CR7090, CR8080, CR8090, CR9040, CR9060, CR9070, CR9080, CR9090 
• DOES NOT FIT ROWTRAC MODELS

Update for the early style STX and 9370/9380 Quadtracs

• QuadTrac 9370, QuadTrac 9380
• QuadTrac STX440
• QuadTrac STX375, STX425, STX450, STX500 (BSN: -JEE0107427)

What's Included?

• Axle Housing and Shaft - 48011455, 84222577, 84222574, 84304872,  87345926
• Wheel Hubs x 2 - 84272488, 379708A3, 84234874
• Idler Pins x 2 - 87324220
• Spacers With Bolts x 2 - 87585083 and 47534762

Specifications

• Wheel Mount to Wheel Mount - 18.5"

Warranty

• 2 Year or 1,000 Hours
• NOTE: Perform Seal Break-In Procedure

Shipping

• Free Standard Shipping*

Core Rebate

• Get up to $1,000 in core rebates when you return an assembly.

Reference

• Hub - 303968A4, 379708A3, 48025810, 84202392, 84234874, 84272488, 87416606, 87441101, 379709A1, 84272489
• Marked 84162359

NOTE: Chill idler pivot shafts (part number for ease of installation.

• The fit of the idler pivot shafts (part number 87324220) to the track undercarriage main beam (part number 87326383) is very close between the recess in the main beam and the idler pivot shaft.
• To aid in assembly, it is recommended to chill the idler pivot shafts in a freezer or similar device prior to assembly. This can help to install the idler pivot shaft, and ensure it is installed straight and to the bottom of the recess properly.