PowrQuad Range Transmission (A-B-C-D) 25 mph, MFWD
7600, 7700, 7800
7610, 7710, 7810 (SN - 089999)
7710, 7810 (SN 090000 -)
RE170664 (Marked R152467, R164266)
Sub to RE168690 - $2,500 (bare hsg)
RE50003 (Marked R93552)
RE150487 (Marked R152467)
R94237, R120390 A/B Range Shaft
R94241, R120389 D Range (Sub to R542883)
RE54778, RE286937 C/D Range Syncronizer (Sub for RE55982)
R119981 C Range
R106843 Ring
R119982 C Range
R95764, R122521 D Range
R93255 MFWD Gear
R158542 B Range (Sub R94236)
RE286934 Syncronizer (Sub RE54776, RE247685, RE33356, RE54746)
R328363 A Range (Sub R158540, R94235)
RE205824 10T Pinion (Marked R130787, R130789) Sub for RE35611, RE66072, RE199238 (R199237, R199236)
Comes with Pinion Shaft Only
7810
PowrQuad Transmission with Right-Hand Reverser
LEGEND:
A - Range Lever
B - Speed Lever
C - Right-Hand Reverser Lever
Depress the clutch when shifting from one range to another.
Move speed lever (B) to select four power-shiftable gears without using the clutch.
Move right-hand reverser lever (C) from PARK position to FORWARD position for forward operation. Pull the lever back for reverse operation. Gearshift lever can be shuttle shifted from forward to reverse without using the clutch.
Operate the clutch when working in a confined area or making an emergency stop.
7810
AutoQuad II Transmission Console
LEGEND:
A - Range Selector Lever
B - Upshift/Downshift Switch-Console
C - Upshift/Downshift Switch-Range Lever
D - Auto/Economy Mode Switch
Depress the clutch when shifting from one range to another.
Normal operation of AUTO/ECO modes of AutoQuad II transmission occurs when hydraulic oil temperature is above -15° C (5° F). Colder temperatures will affect speed shifting. AUTO/ECO functions will be disabled or limited to slower shifts. Range selection will not be affected.
Manual Mode
In the manual mode, gear changes are made by pressing the upshift/downshift switch (B) on the console, or switches (C) on range selector lever (A).
Rabbit and turtle icons on the switches correspond to upshift and downshift.
Gear changes can be made without depressing the clutch.
AUTO Mode
Depressing the AUTO/ECO mode switch (D) activates AUTO mode.
Pressing the switch again or pressing the upshift/downshift switch (B) or (C) restores the manual mode.
In AUTO mode, engine speed and throttle position are sensed. This allows gear changes within the selected range to be performed automatically.
7810
Forward/Reverse Shuttle Lever
LEGEND:
A - Left-Hand Reverser
The left-hand reverser (A) provides fully modulated shuttle shift capability between forward and reverse.
NEUTRAL position is detented so lever cannot be inadvertently bumped into gear. Pull shuttle lever toward operator, then upward to move forward. Move lever downward for reverse. Forward/Reverse shuttle lever automatically returns to NEUTRAL position when the range-shift lever is placed in PARK position.
