Heavy Duty Drawbar, Category 3 to Category 4 Conversion
The Category 4 drawbar with heavy-duty support is designed to handle heavy loads exerted on the drawbar. Operators will benefit when using large drawn implements, DB planters, grain carts, liquid tanks, or similar items that place a large amount of vertical weight on the drawbar.
By adding this attachment, the drawbar, clevis, and pin increase from the base Category 3 to the Category 4 classification. This means that the drawbar pin diameter increases to 51 mm (2 in.). This kit includes an additional support under the drawbar assembly that increases the tongue weight capability to 4990-kg (11,000-lb) vertical load.
Also, to aid the operator when hooking up to an implement, there is an easy-to-use linkage that will allow the drawbar pin to drop into field position. This simple-to-use linkage is activated when it is tapped by the implement drawbar.
Code 4322 - Category 4 adjustable swinging drawbar with 50-mm (2-in.) pin with heavy-duty support
4,490 kg (11,000 lb) Maximum vertical load. Use of 540 rpm PTO shaft is not recommended due to interference during turns.
Bill of Materials (BOM):
Fits John Deere tractor(s)