John Deere® 9 Series Final Drive, 14 Bolt, 100 mm
R122535, R156487
$11,250 + $2500.00 Core
| Condition | Part # | Stock # |
| Used | RAFD9.100 | 356766 |
|
♻️ 100 mm, Single Reduction, Final Drive, 14 Bolt Axle ⚙️ Fitment: 9100, 9200, 9300, 9120, 9220, 9230 ▫️ Axle Housing R122535, R156487 ▫️ Axle Shaft R61295, R153617 ▫️ Ring Gear R124631, R135966, R157061 ▫️ Planetary Carrier R111467, R153619 ▫️ Planetary Gears R124629, R157059, R560118 ▫️ Pinion Shaft R111450, R157057, R328166 ♻️ Core Final Drive $7,500 ♻️ Ready to Install™️ Final Drive $9,000 ♻️ Ready to Install™️ Final Drive w/ New Bearings $11,250 🚛 Free Shipping ♻️ Core Final Drive (needs bearings) ⚙️ Failed the axle bearing test and passed the planetary gear set inspection. ▫️ 30 Day Part Warranty (does not cover bearings, seals or labor). ♻️ Ready to Install™️ Final Drive ⚙️ Passed the axle bearing test and passed the planetary gear set inspection. ▫️ Install a new outer axle seal and re-torque the planetary carrier to spec. ▫️ 12 Month or 1,000 Hour Part Warranty (does not cover labor). ♻️ Ready to Install™️ Final Drive with New Axle Bearings and Seals. ⚙️ Completely Disassembled and Reconditioned to OEM Specs. ▫️ New Inner and Outer Axle Shaft Seals and Bearings. ▫️ 24 Month or 2,000 Hour Part Warranty ▫️ 12 Month or 1,000 Hour Labor Warranty (when dealer installed) ◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾◾ ♻️ Core Acceptance Criteria (CAC) ⚙️ Cores will be accepted if a visual inspection indicates the following: ▫️ Core is "like-for-like" matching the part sold. ▫️ Core is "off-machine condition" w/ no prior attempts to repair or rebuild. ▫️ Core is a complete unit and not disassembled in any manner or missing parts. ▫️ Core has been removed from the machine according to OEM service guidelines. ▫️ Core has been properly packaged for return shipment w/ no shipping damage. ▫️ Core has been protected from the eliminates and does not appear to have been stored outside. ▫️ Rust that occurs on exterior surfaces of components exposed to weather conditions from normal operating conditions is acceptable. ▫️ Interior surfaces or any machined surface can only have light flash rust, heavy rust due to improper storage is not acceptable. ♻️ Core Acceptance Criteria (CAC) Refunds ▫️ Cores meeting the Core Acceptance Criteria will receive a full refund. ▫️ Cores not meeting the CAC will have a preset reduced refund. ▫️ Core components have a preset price based on part type and part number. ♻️ Core Acceptance Criteria (CAC) Refunds ⚙️ 100% Refund - meets all CAC guidelines ⚙️ 50% Refund - is not like-for-like or is not "off-machine condition" ⚙️ 25% Refund - is not complete or returned disassembled ------------------------ Fits John Deere tractor(s) 9100, 9120, 9200, 9220, 9230, 9300 Marked Numbers: R122535, R156487 |
||
We have 3 other John Deere® 9 Series Final Drive, 14 Bolt, 100 mms in stock
-
John Deere® 9 Series Final Drive, 14 Bolt, 100 mm
R122535, R156487
Condition: Used Part #: RAFD9.100 Remarks: Rear Axle Final Drive, 9 Family, 100mm
$11,250 ✓ships today -
Cnh 500 Series Axle, Final Drive,115mm
Condition: Used Part #: RAFD9.115
$7,670 ✓ships today -
John Deere® Final Drive, 120 mm, 18 Bolt
9020 and 9R Series Tractors
Condition: Used Part #: RAFD9.120HD Remarks: Final Drive, 120 mm, 18 Bolt
$10,750 ✓ships today