John Deere 6400 Hyd Remote Valve & Parts


Condition Part # Stock #
Used AL118409 214230
✅ Tested
✅ Good condition

Selective Control Valve AL171118
200 Series 2 detent valve
Loader Lift Valve with Flow Control (6000 and 7000 Series Tractors)
Can be used in place of AW29285 w/o Flow Control

There are many different SCV configurations one can choose when ordering a John Deere utility
tractor. Ordering codes differ in detent type (either 100, 200, or 300), type of coupler (standard or
deluxe), and how many SCV valves come on the rear of the tractor.
Optional rear SCVs for positions 1 and 2
Optional rear SCVs for positions 3 and 4+

SCV configuration options:

100 Series valve
The 100 Series SCVs have detent in raise, lower, and float. The SCV will hold in detent until it's moved
to neutral.
Four-position lever control with detent setup from the factory
Maximum flow up to 21 gpm
100 Series - No detent
200 Series - 2 detent

200 Series valve
1. Flow control
2. No detent
3. Continuous hydraulic motor
In addition to the features of the 100 Series mechanical valve, the 200 Series valve features:
Maximum flow infinitely adjustable [1] from 0 gpm to 29 gpm (only up to 21 gpm with the small
Selectable detents allow switching between no detent (ideal for loader operation) [2] and
mechanical detent (for continuous hydraulic motor operation) [3]

300 Series valve
4. Pressure controlled
Selective control valves
Operating loader using SCV
Adjustment of pressure limit at SCVs

In addition to the features of 200 Series mechanical SCVs, the 300 Series SCVs feature:
Maximum flow infinitely adjustable from 0 gpm to 29 gpm (only up to 21 gpm with the small
Temperature-compensated adjustable flow continuously regulates the flow of oil between zero and
maximum in both directions, regardless of oil temperature (this will give daylong constant speed
operation of hydraulic motors without the need for adjustment)

Selectable hydraulic detent [4]—the SCV lever will remain engaged until a preset pressure is
reached; it will then automatically kick out to the neutral position (this mode is particularly useful
when repeated SCV operations are performed, such as turning a plough or drill marker cycling)

Flow control:
The control dial is located in the SCV and can be reached from the operator's seat by opening the
rear window
It can be adjusted while oil is flowing
The load check valve on the lower port prevents loader and implement linkage creep
Flow rates can be adjusted from 0 gpm to 29 gpm, with reduced flow if more than one SCV is
operated at the same time
300 Series - 3 detent
Hydraulics, rear selective control valves (SCVs)

 -  Parts for   -
 -  Parts for   -
 -  Parts for   -

Fits John Deere tractor(s)
6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6320L, 6400, 6410, 6415, 6420, 6510, 6515, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7505, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7730, 7800, 7810, 7830, 7930

Substitution Numbers

Enter Zip for freight quote
Get Shipping Quote

Add to Cart 

Text Us! 573-242-5582
We have 2 other John Deere 6400 Hyd Remote Valve & Parts in stock