John Deere Hyd Remote Valve & Parts
$500Condition | Part # | Stock # |
Used | AL118409 | 212057 |
✅ Good condition Selective Control Valve AL171118 200 Series 2 detent valve Loader Lift Valve with Flow Control (6000 and 7000 Series Tractors) Can be used in place of AW29285 w/o Flow Control There are many different SCV configurations one can choose when ordering a John Deere utility tractor. Ordering codes differ in detent type (either 100, 200, or 300), type of coupler (standard or deluxe), and how many SCV valves come on the rear of the tractor. Optional rear SCVs for positions 1 and 2 Optional rear SCVs for positions 3 and 4+ SCV configuration options: 100 Series valve The 100 Series SCVs have detent in raise, lower, and float. The SCV will hold in detent until it's moved to neutral. Four-position lever control with detent setup from the factory Maximum flow up to 21 gpm 100 Series - No detent 200 Series - 2 detent 200 Series valve 1. Flow control 2. No detent 3. Continuous hydraulic motor In addition to the features of the 100 Series mechanical valve, the 200 Series valve features: Maximum flow infinitely adjustable [1] from 0 gpm to 29 gpm (only up to 21 gpm with the small pump) Selectable detents allow switching between no detent (ideal for loader operation) [2] and mechanical detent (for continuous hydraulic motor operation) [3] 300 Series valve 4. Pressure controlled Selective control valves Operating loader using SCV Adjustment of pressure limit at SCVs In addition to the features of 200 Series mechanical SCVs, the 300 Series SCVs feature: Maximum flow infinitely adjustable from 0 gpm to 29 gpm (only up to 21 gpm with the small pump) Temperature-compensated adjustable flow continuously regulates the flow of oil between zero and maximum in both directions, regardless of oil temperature (this will give daylong constant speed operation of hydraulic motors without the need for adjustment) Selectable hydraulic detent [4]—the SCV lever will remain engaged until a preset pressure is reached; it will then automatically kick out to the neutral position (this mode is particularly useful when repeated SCV operations are performed, such as turning a plough or drill marker cycling) Flow control: The control dial is located in the SCV and can be reached from the operator's seat by opening the rear window It can be adjusted while oil is flowing The load check valve on the lower port prevents loader and implement linkage creep Flow rates can be adjusted from 0 gpm to 29 gpm, with reduced flow if more than one SCV is operated at the same time 300 Series - 3 detent Hydraulics, rear selective control valves (SCVs) ![]() ![]() ![]() ------------------------ Fits John Deere tractor(s) 6100, 6110, 6120, 6200, 6210, 6215, 6220, 6300, 6310, 6320, 6320L, 6400, 6410, 6415, 6420, 6510, 6515, 6615, 6715, 7200, 7210, 7220, 7320, 7400, 7410, 7420, 7505, 7510, 7520, 7600, 7610, 7630, 7700, 7710, 7730, 7800, 7810, 7830, 7930 Substitution Numbers |
We have 2 other John Deere Hyd Remote Valve & Parts in stock