9R iT4 Hitch

• In-Stock 
• Reconditioned Rockshaft, Quick Hitch
• New Draft Control
• Cat 4 Drawbar with Hammer Strap
• Cat 4 Quick Hitch and Top Link
• DOES NOT include lift cylinders

John Deere 9R iT4 Hitch

Electrohydraulic 3-point hitch with draft sensing.
NOTE: Not compatible with factory or field-installed sixth remote SCVs.
For tractors equipped with a factory-installed heavy-duty drawbar support.

Also Required - dual-lift cylinders, quik-coupler, and software are also required or this kit. Other parts may be required based on configuration. See installation instructions. Compatible on 9360R, 9410R, 9460R, 9510R, and 9560R Series Tractors.

Base Hitch Includes - $22,500
Hitch Valve and Manifold - Add $5,000
Quick Hitch and Center Link - Add $6,750

• Drawbar Support - R310724
• Wear Plate - R229870
• Mounting Brackets - RE304701
• Center Link Mounting Bracket (SRA) - R298447
• Lift Link
  • Link End - RE298459
  • Body Link - R298462
  • Yoke - R298457
  • Lift Link Handle - R280371
  • Locking Collar - R311007
  • Upper Pin - R304684
  • Lower Pin - RE333939
  • Ball - R106409
  • Bolt - R307496
• Draft Arms
  • • Draft Arm - RE329218
    • Sway Block - R309749
    • Bumper - R207661
• Bracket - RE329373
• Sway Blocks - R304695 and R304694
• Draft Sensor
• Rockshaft Assembly
  • Rockshaft - RE298424
  • Shaft - R87139
  • Supports - R332638

Optional Parts:

• Center Link - RE280398 and RE280400 - $1,250
• Quick Coupler CAT 4/5 - RE270268, RE263254, RE337043 or RE586956 - $5,500
• Quick Coupler CAT 3/4 - RE270270, R242456, R538235 - $5,000
• Hitch Valve - RE580230, RE309274 or RE588378 - $2,500
• Manifold - RE289198, RE557708 - $2,500

Parts Not Included:

• Hitch Position Sensor
• Lift Cylinders:
  • 15,000 lb = 90 mm and 100 mm
  • Lift Cylinder, 90 mm - AHC10487
  • Lift Cylinder, 100 mm - AHC10488
  • 20,000 lb = 110 mm x 2
  • Lift Cylinder, 110 mm - AHC10045