Axles
| Type: Front Axle | Rear Axle | MFWD | 4WD | |||||
| Number | Model | Warranty | Description | Price | |
| John Deere | |||||
 |
2130 FWA kit | 2130 | 90 Day | 2130 Front Wheel Assist, Hydrostaic Style Axle Kit, All Major Parts, Come Off A Fire Demaged Tractor. Will Need Hydraulic Lines Etc. | $3,000 |
 |
2550 MFDHub | 2155,2350,2550,2555 | Six Month | New LH or RH hub assy w/ knuckle. | $4,500 |
 |
2550 MFDHub | 2350-2555 | 90 Day | Used LH or RH hub assy w/ knuckle. $3750 exch for rebuilt. 1 w/o knuckle in stock $2750 | $3,250 |
 |
2950 MFDHub | 2750, 2950, 3140 | 90 Day | Used hub $3500 or Rebuilt $4000 assy w/ knuckle. (LH or RH) | $3,500 |
 |
2755 MFDHub | 2755 | 90 Day | Used MFD hub w/ knuckle $3250or $3750for rebuilt. (LH or RH) | $3,250 |
 |
2940 MFWDdiff | 2940 | 90 Day | Good used MFD diff assy w/ R&P. $3750 for rebuilt. | $3,250 |
 |
2940 MFDHub | 2940 | 90 Day | Good used MFD hub assy. $3750 for rebuilt. | $3,250 |
 |
2955 MFDHub | 2955, 3155 | 90 Day | Used MFD hub assy $3500or $4000on rebuilt. (LH or RH) | $3,500 |
 |
3215 Tele Center Sec | 3215 Telehandler | Six Month | Rebuilt Axle Center Section; Sold on Exchange | $6,500 |
 |
3255 MFDHub | 3255 | 90 Day | Used hub w/ 4 planet gears, $3500exch or $4000on rebuilt. | $3,500 |
 |
4020HD | 4020 | 90 Day | Rebuilt 4020 heavy duty axles from a 4430 or 4630... Ready to install on a 3010-4320... 6 or 8 hole hubs avaliable... | $1,750 |
 |
4020 RegAxle | 4020-3010 | 90 Day | Good used axle assy w/ hubs. | $1,250 |
 |
4455 MFDAxle | 4050 - 4455 | 90 Day | Used complete JD style MFWD axle assy w/ exchange. Send driveshaft when converting from ZF. Add $2500 for rebuilt and add $2500 for quad trans since the R&P is no long available. | $12,500 |
 |
4450 ZF Axle Hsg | 4450 | 90 Day | Bare ZF Axle Housing, sold on exchange... | $5,500 |
 |
4450 MFD Diff | 4450-4050 | 90 Day | Used ZF MFWD Center Section, Powershift $5000 exch w/ 13T/40T R&P... Quad $7500 exch w/ 15T/29T R&P... | $5,000 |
 |
4450 MFDHub | 4450-4050 | 90 Day | Good used LH or RH MFWD Hub w/o knuckle. | $2,500 |
 |
4640 RearAxle | 4640,4650,4555,4760 | 90 Day | Good Used Axle Assy for $3250 or $4000 for rebuilt w/ exch. | $3,250 |
 |
4955 MFDaxle | 4650-4960 | 90 Day | Take off 4955 style MFD axle. Add $1500 for rebuilt. Sold w/ exch. If converting from old ZF style, $12500 exch for axle, plus $2500 for steering motor. (steering motor may not be required) | $10,000 |
 |
4850 MFDHub | 4650/4850 | 90 Day | Good Used Hub Assy, $1750 or $2250rebuilt w/o knuckle. | $2,500 |
 |
4700 DriveHub | 4700 Sprayer | 90 Day | Good used, opened and inspected hub assy. #65526 | $1,875 |
 |
4710 DriveHub | 4710 Sprayer | 90 Day | Good used, opened and inspected rear hub assy. #65497 | $2,125 |
 |
4840 RearAxle | 4840, 4850, 4955 | 90 Day | Good used rear axle assy. $3000 for rebuilt. | $2,500 |
 |
4850 MFD Diff | 4850-4650 | 90 Day | Complete used 3rd member w/ R & P for powershift. $5750 for rebuilt. | $5,000 |
|
4955 MFDHub | 4960-L4650 | 90 Day | Used LH or RH MFD Hub or $3250 for rebuilt. | $2,750 |
 |
5000 HD | 30 Day | JD 5100-5420 HEAVY DUTY FRONT AXLES | $2,500 | |
|
5100-5420 HD | 5100-5420 | 90 Day | JD 5100-5420 , HD Rebuilt, new bushings and seals | $2,500 |
 |
5200 MFDHub | 5200-5400 | Six Month | Rebuilt LH or RH Hub Standard Style w/ Axle Shaft, Sold W/Exchange. Hat depth is 2 1/2". Also Have New Standard Hubs For $4000 Exchange. | $3,000 |
 |
5420 MFDHub | 5420 | Six Month | Rebuilt LH or RH Hub Assy w/ New Seals & Bearings. Axle and driveshaft. (global or standard axle) This is a Pic of a Globel Style Hub. Hat depth is 4 1/2". | $3,000 |
 |
6000 DriveHub | 6000 Hi-Cycle | 90 Day | Good used 6000 Hi-cycle drive hub. $1150 for rebuilt. | $900 |
|
6400 MFDHub | 6300-6400 | 90 Day | Good used hub assy w/ knuckle or $3000 for rebuilt. (LH or RH) | $2,500 |
 |
6400 MFDHub | 6400 | 90 Day | Used Hub w/o steering knuckle... (LH or RH) | $2,000 |
 |
6500 DriveHub | 6500 | 90 Day | Good used rear drive hub, opened and inspected. S/N -6001 40:1 ratio, S/N 6001- 34:1 ratio. $4000 for Rebuilt, New for $5000 | $3,500 |
 |
7400 RearAxle | 7200-7510 | 90 Day | 2 - Rear axle assys to drop down a Hi-crop tractor. 2 - 26" MFD tires and wheels, MFD R&P. (No rear tires/wheels included in this price) Cust can use his hi-crop rear wheels. | $7,500 |
|
7400 MFDaxle | 7400 | 90 Day | Used complete MFD axle assy. Row crop or Hi-crop? Add $1500 for rebuilt. | $8,500 |
 |
7400 MFDHub | 7400-7200 | 90 Day | Good used hub assy or $3000 for rebuilt. (LH or RH) | $2,750 |
 |
7420 RB Hub Assy | 7420/7410 | Six Month | Good Used MFWD Hub Assy $3500 exch or Rebuilt MFWD Hub Assy $4000 exch | $3,500 |
 |
7800 MFDaxle | 7800, 7700, 7600 | 90 Day | Complete 7800 MFD axle kit to convert 2wd. Includes axle, drop box, driveshaft w/ tires and wheels. Add $1500 for rebuilt. | $12,500 |
 |
7800 MFD Hub | 7810-7600 | 90 Day | Good Used Hub Assy $2500 exch or Rebuilt $3000 exch | $2,500 |
 |
8420 RB MFWD Hub | 8210-8420 | Six Month | Rebuilt 4-Pinion MFWD Hub Assy w/ Knuckle; Sold on Exchange; *In Stock* 1 LH Hub w/ All New Gears- $4000 exchange #85821 | $4,000 |
 |
8400 MFDHub | 8400-8100 | 90 Day | Good used MFD hub assy w/ knuckle or $4000 for rebuilt. (LH or RH) | $3,500 |
 |
8400 MFD Diff assy | 8400-8100 | 90 Day | Rebuilt, MFWD Diff assy, exch. New seals and bearings. | $4,000 |
 |
8630 FrtDiff | 8630 | 90 Day | Complete center section. Add $1000 for rebuilt. | $3,000 |
 |
8630 FrtAxle | 8630 | 90 Day | Good used 4" axle assy w/ 47" axle. (one corner only) $3750 rebuilt | $3,000 |
|
8630 FrtAxle | 8630- L | 90 Day | Good Used Axle Assy w/ 4" Axle (one corner only) $3750 for rebuilt. | $3,000 |
 |
8870 RearAxle | 8870-8570 | 90 Day | Complete 8770 w/ 12 or 24 spd trans rear, 100mm axle assy. Sold w/ exchange. $8500 for 110mm axle. Add $2000 for rebuilt. 100mm $2500 per side, 110mm $3500 per side. | $7,500 |
 |
9400 AxleDiff | 9300-9520 | 90 Day | Used 9300-9520 style axle center section. (check application and cast #'s) add $750 for rebuilt. | $6,000 |
 |
9400 axle | 9300-9520 | 90 Day | Good used axle assy, add $750 for rebuilt. Get casting #'s off each part and check axle diam. | $6,000 |
| Case | |||||
 |
3394 MFDHub | 3394, 2096, 1896 | 90 Day | Good Used, R.H MFWD Hub. $3750 for rebuilt. | $3,250 |
 |
3394 MFDHub | 3394, 3294, 2096 | 90 Day | Good Used, L.H. MFWD Hub. Small chip on sun shaft. | $2,750 |
 |
3594 MFDHub | 3594 | 90 Day | Good Used Hub Assy (4-pin) $3750 rebuilt. LH or RH | $3,250 |
 |
3594 MFDdiff | 3594, 3394 | 90 Day | Loaded 3594 MFD diff w/ R&P. Sold w/ exch. Discount $500 for cosmetic rust pitting on R & P. No warranty on bearings &seals | $5,000 |
|
5140 MFWD Hub | 5120-5250 | One Year | Good Used MFWD Hub w/ Knuckle; $3500 for Rebuilt; Sold on Exchange (NOT SOLD w/ axle shaft, add $500 for shaft assy) | $3,000 |
 |
7140 MFDHub | 7110-7250 | One Year | Good used $4000, Rebuilt $5000 w/ knuckle and exch. (LH or RH, 3 or 4 pin) | $5,000 |
 |
7140 MFWDdiff | 7140-7110 | 90 Day | Good Used Inspected Front Center Section. Rebuilt - $3250 Exchange | $2,500 |
 |
8910 MFDHub | 8910 | Six Month | Rebuilt 3 pinion hub assy. $3500 for used. | $4,000 |
 |
8950 MFDHub | 8910-8950 | One Year | Good used $4500, Rebuilt $5000 w/ knuckle and exch. (LH or RH, 3 or 4 pin) | $5,000 |
 |
8950 MFDdiff | 8950-8910 | Six Month | Good used MFD diff assy (3.73 or 4.10 ratio). Rebuilt $3250. | $2,500 |
 |
8950 MFDHsg | 8950-8910 | 90 Day | Bare main MFD axle. | $3,000 |
 |
9280 Axle | 9280 | One Year | Good Used Complete Axle 598.68. Or comes in pieces Used Hubs $3500 each, and Used 3rd Member $4500 | $10,500 |
 |
9330 RearAxle | 9330 | 90 Day | Good used complete, Bar style Axle, Less Diff. Lock | $7,500 |
 |
9330 FrtAxle | 9330 | 90 Day | Good Used Complete, Bar Style Axle, less Diff. Lock | $7,500 |
 |
9350 Hub | 9350-9390 | 90 Day | Good used, opened and inspected Raba 694.62 rear hub assy. Sold w/ exchange. | $4,500 |
 |
9350 Hub | 9350-9390 | 90 Day | Good used, opened and inspected Raba 694.62 rear hub assy. Sold w/ exchange. | $4,500 |
 |
MX230 MFDDiff | MX230 | 90 Day | MFD diff assy w/o lock for MX210, 230, 255 & 285. (check 10 or 12 bolt axle) Good used $3500, Rebuilt $4000, both sold on exch. Part # 87404542 (12 both axle is higher) | $3,500 |
 |
MX270 MFDHub | MX230 - MX285 | 90 Day | Rebuilt MX230, 240, 255, 270, 285 MFWD hub assy. (check applications, bolt holes and LH or RH) Used $4000 | $4,500 |
 |
MX240 MFDdiff | MX240-MX270 | 90 Day | Rebuilt MFD diff assy w/ exch. | $3,500 |
| IH | |||||
 |
IH 1086 axle | 1066-1586 | 90 Day | Nice tight 2wd axle assy... Add $500 for steer cyl and bolster... Add another $500 for rebuilt. | $1,500 |
| Ford | |||||
 |
7610 Hub Assembly | 90 Day | Good Used Hub Assembly With Shaft, Carraro style, $3500 for Rebuilt | $3,000 | |
 |
7710 MFWD Hub | 6610, 7710 | 90 Day | Rebuilt LH hub assy w/ knuckle. | $4,000 |
|
APL 345 Hub | 6610, 7710 | 90 Day | Rebuilt MFWD hub assy w/ knuckle. Sold on Exchange | $4,000 |
|
7710 MFDHub | 7710,6610,5610 | Six Month | New hub assy. (LH or RH) | $4,500 |
 |
7710 MFDHub | 7710-5610 | 90 Day | Good used hub assy or $3750 rebuilt. (LH or RH) | $3,250 |
|
APL355 | 8630, TW15, TW5 | 90 Day | Good used $4250 exch, rebuilt $4750 exch. | $4,250 |
 |
8730 MFDDiff | 8730 | 90 Day | Complete Used Front Axle Center Section | $2,500 |
 |
Super Steer Hub | 8970 MFDHub | One Year | Good Used Super Steer Hub Assemblys, Rebuilt $5000, LH or RH available, Sold W/Exchange | $4,500 |
 |
Standard Steer Hub | 8970 MFDHub | One Year | Good Used Standard Steer Hub Assemblys, Rebuilt $4000, LH or RH available, Sold W/Exchange | $3,500 |
